| Bale Spears |
|---|
| Picture | Attatchment | Specs | Price |
|---|
 | Round Bale 2-tine Spear | Constructed of heavy duty 3” x 3” x 1/4” steel frame Two 48" conus tines on the bottom Universal hook-up - It also fits case 1845 and 1840 Heavy duty universal mounting brackets | $695.00 |
|---|
 | Round Bale 3-tine Spear | Heavy duty 3" x 3" x 1/4" steel frame Two 24" conus tines on the bottom One 48" conus tine in the center Universal attachment | $635.00 |
|---|
 | Combination Bale Spear | Two 32" and two 24" sleeved conus tines Heavy duty frame 3" x 3" x 1/4" tubing Frame is 60" wide Universal attachment or custom built Extension sleeves available | $765.00 |
|---|
 | Large Square Bale Spear | Four 32" sleeved conus tines Heavy duty frame 3" x 3" x 1/4" tubing Frame is 60" wide Universal attachment or custom built Will support 2 bales Extended sleeves available | $820.00 |
|---|
| Buckets |
|---|
 | Low Profile Dirt Bucket | Various sizes available All buckets made from 1/4" plate steel 3/4" x 6" cutting edge - weld on or bolt on Ends of buckets are framed with 3/8" x 3" cutting edge Reinforced heavy duty universal mounting brackets (3 to 4) 1/2" x 4" wear plates depending on size | Starting at $765.00 |
|---|
 | Snow Bucket Bolt On or Weld On Cutting Edge Available | 6', 7', 8' standard widths or custom sizes Perforated top for volume and great visibility 3/4" x 6" Cutting edge -- weld on or bolt on Ends of buckets are framed with 3/8" x 3" cutting edge Consstructed of 1/4" plate steel Step for easy access Reinforced heavy duty universal mounting brackets (3 to 4) 1/2" x 4" wear plates depending on size | Starting at $910.00 |
|---|
 | Rock Bucket | 58", 70", 80" Standard sizes Constructed of 1" solid plate steel with lasered cut teeth Rods are 7/8" solid rod placed 3-1/2" on center 2-3/4" spacings between rods Welded to a heavy 3" x 4" x 3/8" angle iron top and bottom 1/2" steel side plates Reinforced heavy duty universal mounting brackets | Starting at $935.00 |
|---|
 | Tooth Bucket | Various sizes available Made from 1/4" plate steel 3/4" x 6" cutting edge - weld on or bolt on Heavy-duty cast iron adapter cover wtih steel tooth (3 to 4) 1/2 x 4" wear plates on bottom for strength Reinforced heavy duty universal mounting brackets | Starting at $1010.00 |
|---|
| Grapples |
|---|
 | Bucket Grapple | - Standard sizes 72" or 80" or custom built
- Also available in 60" with single grapple
- 3/4" x 6" cutting edge
- Two 2" x 8" hydraulic cylinders with built in orifices
- Hoses up to the T
- Bucket constructed of 1/4" plate steel
- Reinforced heavy duty universal mounting brackets
- Lasered half-moon cut end plates
| Starting at $1865.00 |
|---|
 | Bucket Curved Tine Grapple | Standard sizes 60", 72" or 80" or custom built 3/4" x 6" cutting edge Single hydraulic cylinder with hoses and build in orifices Lasered half-moon cut end plates made form 1/2" plate steel Bucket is constructed of 1/4" plate steel Grapple tines are 24: curved conus times Heavy duty frame Reinforced heavy duty universal mounting brackets Includes hoses | Starting at $2335.00 |
|---|
 | Industrial Tine Grapple | Standard sizes 60" or 72" or custom built Tines are constructed of 1-7/8" of stress proof shaft sleeved and pinned Heavy-duty double grapples made from 1/2” plate steel Two 2" x 8" custom made hydraulic cylinder with built in orifices Reinforced heavy-duty mounting brackets Hydraulic hose to the T | Starting at $1975.00 |
|---|
 | Material Fork Curved Tine Grapple | Standard sizes 60” and 72” or custom built Heavy duty frame Tines are sleeved and constructed of 1 ½” x 1 ½” stress shaft Sharp taper for easy penetration Tines are 32” long Grapple tines are 24 inch curved conus tines Single hydraulic cylinder with hoses and orifice Reinforced heavy duty universal mounting brackets | Starting at $1975.00 |
|---|
 | Material Fork Grapple | Tines are sleeved and constructed of 1-1/2" x 1-1/2" stress shaft Sharp taper for easy penetration Tines are 32" long Reinforced heavy duty universal mounting brackets Heavy duty frame Single or double 2" x 8" custom made hydraulic cylinders with built in orifices Hydraulic hoses to the T | Starting at $1755.00 |
|---|
 | Rock Bucket Grapple | Standard sizes 58 ", 70" or 80" 58" also available in a single grapple Constructed of 1" solid plate steel with lasered cut teeth in plate Rods are 7/8" solid rod placed 3-1/2" on center which gives a 2-3/4" opening Welded to a heavy 3" x 4" x 3/8" angle iron top and bottom End plates are 1/2" plate steel laser cut Reinforced heavy duty universal mounting brackets Two heavy duty grapples made from 1/2" steel Two 2" x 8" custom made hydraulic cylinders with built in orifices Hydraulic hose up to the T | Starting at $2195.00 |
|---|
 | Root Grapple | Standard sizes 62" or 74" or custom built 62" also available in a single grapple Constructed of 1/2" plate steel with two 1-1/2" solid shaft running thru the bottom 1/2" gussets welded in for extra strength Two heavy duty grapples made from 1/2" plate steel Two 2" x 8" custom made hydraulic cylinders with built in orifices Reinforced heavy duty universal mounting brackets Hydraulic hose up to the T | Starting at $2300.00 |
|---|
| Other Attachments |
|---|
| | Material Fork | Standard sizes 60" and 72" or custom built Tines are sleeved and constructed of 1-1/2" x 1-1/2" stress shaft Sharp taper for easy penetration Tines are 32" long Heavy duty frame Universal attachment | Starting at $875.00 |
|---|
 | Back Hoe | Heavy duty 20" bucket with 4 teeth Greasable heavy duty pins Requires minimum 30 HP Equipped with a 3" x 16" hydraulic cylinder and hoses Digs up to 7-1/2 feet deep Universal attachment Weight with 20" bucket is 610 lbs 10" bucket also available | $2500.00 |
|---|
 | Big Ripper | Ripper teeth are 6” long Great for roots, stumps, trenching, boulders Available in two sizes 24” and 36”
| $875.00 |
|---|
 | Brush Devil | Available in 60” and 72” The brush mower cuts small trees, brush and grass Heavy duty gear box Powered by Eaton – (Char-Lynn) motor Torque at 3000 PSI Requires 15 to 21 gallons per minute Replaceable heat-treated , updraft blades Front and Rear chain guards Mower comes with standard universal mount quick-tach Fits most skid steer | 60"- $3695 72"- $4100 |
|---|
 | Landscape Roller | - 72" Standard roller
- Universal mounting brackets or 3 pt. hitch
| $2035.00 |
|---|
 | Leveling Bar | Standard size 78" Constructed from two 3/4" x 6" hardened cutting edges one in front and one in the back of the leveling bar Frame constructed with 2" x 4" and 2" x 2" tubing A 2-1/2 x 2-1/2" x 3/8" angle iron is welded in the center 1" higher than the cutting edge which causes the dirt to roll A step is welded on for easy access Universal mounting brackets Lift tabs are welded on frame so attachment can be easily moved or carried with a bucket 450 pounds | $1995.00 |
|---|
 | Pallet Forks | Forks are 1 3/8” thick x 4” wide and 48” long Frames are 47" wide Forks are adjustable Slide rail forks are 1-1/4" x 47" Heavy duty 4,000 pound capacity | $695.00 |
|---|
 | PTO Adapter | Runs off skid steer hydraulics Requires a minimum of 16 gallons per minutes Maximum of 30 gallons per minute Creates 20 to 40 horse-power off the power take off No need to modify power take off shafts Adjustable lower arms Comes with motor and hydraulic hoses Universal attachment | $1865.00 |
|---|
 | Quick Hitch | Comes with two receiver tubes Pin-type drawer bar on the bottom Tri-ball hitch in top receiver sizes 1-7/8", 2" and 2-5/16" | $450.00 |
|---|
 | Post Hole Digger | Hydraulic drive unit – low speed/high torque Digs 4-½ to 5 feet deep without extensions Drive unit weight is 245 pounds Direct drive – no chains 2” output shaft Universal mounting brackets Available in tractor loader brackets Auger sold separately. Auger sizes are available in 6”, 9”, 12”, 15”, 18”, and 24" | $1975.00 |
|---|
 | Tree / Root Puller | 3" x 8" hydraulic cylinder and hoses Hydraulic pressure: min. 1800 PSI to max. 2500 PSI 2200 PSI recommended Heavy duty frame Universal hook-up (also fits Case 1845 and 1840) Pulls 5" to 6" trees and roots or fence posts | $2085.00 |
|---|
 | U-Blade | The main frame is constructed of 2-1/2" x 2-1/2" x 1/4" wall tubing Grade 50 plate steel for long life 3/8" thick steel and is beveled on the front and back for two way digging - forward and backward Universal attachment Ideal for transplanting trees, trenching, lifting out rocks or stumps | $985.00 |
|---|
 | Wood Splitter | Inverted horizontal Mount to universal skidsteer 4" x 24" hydraulic cylinder A splitting force of 20 ton at 3000 PSI Can split up to a 24" log Includes hoses | Starting at $1550.00 |
|---|